Connecting The Console Terminal To Magnum 10Kg; Rj45 Console Port (Serial Port) Pin Assignments - GarrettCom Magnum 10KG Installation And User Manual

Magnum 10KG Managed Switch Installation and User Guide
3.6

Connecting the Console Terminal to Magnum 10KG

Note: For a detailed description of Managed Network Software (MNS-6K) and
Magnum 10KG Switch software configuration for Network Management, please refer
to Magnum 6K Software Manual available on GarrettCom's FTP site.
Also available on GarrettCom's website at:
http://www.garrettcom.com/techsupport/sw_downloads.htm
3.6.1

RJ45 Console port (Serial port) pin assignments

Pin
1
2
3
4
5
6
7
8
The above provided information enables a managed station (a PC or a Console terminal)
to connect directly to the switch.
www GarrettCom com . .
RJ45 (Console port connector)
Signal
RTS
open
TXD
GND
open
RXD
open
CTS
26
Use a (RJ45) "null modem" cable
to connect the Magnum 10KG
Console Port (the RJ45 Console
port on the 10KG Switch) to your
PC, so that your PC becomes the
10KG Console Terminal.
Note: The RJ45 null modem
cable is not included with the
10KG package, but two models
are available for purchase. Model
CONSOLE-CBLQD has a DB-9
on the PC end, while Model
CONSOLE-USB has a USB
connector on the computer end.
Description
Request to Send
not used
Transmit Data (output)
Ground
not used
Receive Data (input)
not used
Clear to Send
07/12