10K4Px-Rj45, Four 10/100Mb Poe+ Rj45 Ports (Use In Slots E - GarrettCom Magnum 10KG Installation And User Manual

Magnum 10KG Managed Switch Installation and User Guide
5.1.3 10K4PX-RJ45, four 10/100Mb PoE+ RJ45 ports (use in Slots E-H)
The 10K4PX-RJ45 four-port copper module provides four 10/100Mb switched
RJ-45 ports with PoE 802.3at support. The 10/100Mb switched ports normally (as a
default setting) are independently N-way auto-negotiating and auto-crossover (MDIX)
for operation at 10 or 100Mb speed in full- or half-duplex mode. (i.e., each
independently selects a mode and speed to match the device at the other end of the
twisted pair cable).
(for auto-negotiation and MDIX details, see Section 4.2 in this User Guide)
The PoE 802.3at support on the four RJ45 ports provide 25 Watts per port
output when used in conjunction with the 10KGP chassis.
There are two LEDs per RJ-45 port on the module; one for Link/Activity and
one for F/H Duplex. For the 10K4-RJ45 LED designations, see Section 5.1.1.
A twisted pair cable must be connected into an RJ-45 port and the Link (L/A)
indicator for that port must be ON (indicating there is a powered-up device at the other
end of the cable) in order for the L/A LED to provide valid indications of operating
conditions on that port.
Using the 10KG management software (MNS-6K or MNS-6K-SECURE), the
user may disable auto-negotiation and fix the desired operation of each RJ-45 port. The
user may select 10Mb or 100Mb speed and full- or half-duplex mode per-port as
required. (See the Magnum MNS-6K Software Manual for additional info)
www GarrettCom com . .
34
07/12