Appendix B: Removal / Installation Of The Hot-Swap Power Supply - GarrettCom Magnum 10KG Installation And User Manual

Magnum 10KG Managed Switch Installation and User Guide

APPENDIX B: Removal / Installation of the Hot-Swap power supply

Tools Required:
1 #1 Phillips head screwdriver
Step 1: Locate the Hot-Swap power supply locking screw.
Loosen the locking screw until no longer engaged.
Step 2: Lift the Hot-Swap power supply handle (shown above) to disengage from the
10KG chassis.
Step 3: Slide out the power supply from the chassis. For installation, reverse the order.
www GarrettCom com .
PS2
.
PS1
46
07/12