Copying An Id Card; Changing The Default Settings - Dell E525w User Manual

Copying an ID Card

You can copy both sides of ID card on one side of a sheet of paper in its original size by selecting Start ID Copy.
To make a copy:
1 Place an ID card facing down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the Document Glass" on page 189.
2 Press the (Copy) button
3 To specify the copy options below, press the
(Set) button.
• Lighter/Darker
• Sharpness
• Auto Exposure
• Color
For details about copy options, see "Setting Copy Options" on page 191.
4 Press the button until Start ID Copy is highlighted, and then press the
After the front side of the ID card is scanned, the display prompts you to turn it over.
To scan the rear side of the ID card, turn it over and press the
a
then press the
To finish copying without scanning the rear side of the ID card, press the
b
highlighted, and then press the
NOTE:
You can shortcut by pressing the
NOTE:
If the Function Enabled setting for COPY is set to On(Color Password), you need to enter the four digit
password to start copying in color. For details, see "Function Enabled" on page 158.

Changing the Default Settings

The COPY menu options, including contrast, and image quality can be set as your commonly used modes. When
you copy a document, the default settings are used unless they are changed by using the corresponding buttons on
the operator panel.
NOTE:
While you set copy options, pressing the
status.
To create your own default settings:
1 Press the (Menu) button.
2 Press the button until System is highlighted, and then press the
3 Ensure that Defaults Settings is highlighted, and then press the
4 Ensure that Copy Defaults is highlighted, and then press the
5 Press the
button until the desired menu item is highlighted, and then press the
6 Press the or button until the desired setting is highlighted or enter the value using the numeric keypad, and
then press the (Set) button.
7 Repeat steps 5 and 6, as needed.
8 To return to the previous screen, press the
button until Preferences is highlighted, and then press the
(Set) button.
(Set) button or the
(ID Copy) button on the operator panel.
(Cancel) button cancels the changed settings and returns to the default
(Back) button.
(Set) button.
button until Continue is highlighted, and
button until Print Now is
(Start) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
199
Copying