Dell E525w User Manual page 145

Redial Delay
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is 1 minute.
Junk Fax Setup
Purpose:
To accept faxes only from the numbers registered in the Phone Book. This feature is useful for blocking any
unwanted faxes.
Values:
Off* Does not reject faxes sent from unwanted numbers.
On Rejects faxes sent from unwanted numbers.
NOTE:
Ensure to specify the fax numbers before using
Remote Receive
Purpose:
To receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Values:
Off* Does not receive a fax by pressing a remote receive code on the external telephone.
On Receives a fax by pressing a remote receive code on the external telephone.
Remote Rcv Tone
Purpose:
To specify the remote receive code within the range of 00 to 99 to start Remote Receive feature. The default is 00.
Fax Header
Purpose:
To print the information of sender on the header of faxes.
Values:
Off Does not print the information of sender on the header of faxes.
On* Prints the information of sender on the header of faxes.
Fax Header Name
Purpose:
To set the name of sender to be printed on the header of faxes. Up to 30 alphanumeric characters can be entered.
Fax Number
Purpose:
To set the fax number of the printer to be printed on the header of faxes. Up to 20 digits can be entered.
.
Junk Fax Setup
Understanding the Printer Menus
145