Lighter/Darker - Dell E525w User Manual

Lighter/Darker

To adjust the contrast to make the copy lighter or darker than the original:
1 Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2 Press the
(Copy) button.
3 Press the button until Preferences is highlighted, and then press the
4 Press the
button until Lighter/Darker is highlighted, and then press the
5 Press the or button to select the desired settings, and then press the
NOTE:
Values marked by an asterisk (
Lighter2
Lighter1
Normal*
Darker1
Darker2
Sharpness
To adjust the sharpness to make the copy sharper or softer than the original:
1 Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2 Press the (Copy) button.
3 Press the
button until Preferences is highlighted, and then press the
4 Press the button until Sharpness is highlighted, and then press the
5 Press the
button to select the desired settings, and then press the
NOTE:
Values marked by an asterisk (
Sharpest
Sharper
Normal*
Softer
Softest
*
) are the factory default menu settings.
Makes the copy lighter than the original. Works well with dark print.
Works well with standard typed or printed documents.
Makes the copy darker than the original. Works well with light print or faint pencil markings.
*
) are the factory default menu settings.
Makes the copy sharper than the original.
Does not make the copy sharper or softer than the original.
Makes the copy softer than the original.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Copying
195