Out of Paper
Off
Low
Medium*
High
All Tones
Off
Low
Medium*
High
mm / inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters (mm)
Specifies the default measurement unit.
Inches (")
NOTE:
The default varies depending on country-specific factory default.
Auto Log Print
Purpose:
To automatically print a job history report after every 20 jobs.
Values:
Off*
Does not automatically print a job history report.
On
Automatically prints a job history report.
NOTE:
The job history report can also be printed using the
Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
Does not show the alert message when the toner is low.
On*
Shows the alert message when the toner is low.
152
Understanding the Printer Menus
Does not emit a tone when the printer runs out of paper.
Emits a tone at the specified volume when the printer runs out of paper.
Disables all the alert tones.
Sets the volume of all the alert tones at once.
Report / List
menu.