Network - Dell E525w User Manual

Output Color
Purpose:
To specify the color mode to color or black and white.
Values:
Color* Prints in the color mode. Works well with texts and photos.
Black & White Prints in the black and white mode. Works well with texts.

Network

Use this menu to change the printer settings affecting jobs sent to the printer through the wired or wireless network.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change takes effect after the printer is
turned off and then on.
Values:
Auto*
10BASE-T Half
10BASE-T Full
100BASE-TX Half
100BASE-TX Full
NOTE:
This item is not displayed when the Ethernet cable is disconnected and
Wireless Status
Purpose:
To display the information on the wireless signal strength. No changes can be made on the operator panel to improve
the status of the wireless connection.
Values:
Connection
SSID
Encryption Type
*1
WPA stands for Wi-Fi Protected Access
NOTE:
This item is displayed when the Ethernet cable is disconnected and
Detects the Ethernet settings automatically.
Uses 10base-T half-duplex.
Uses 10base-T full-duplex.
Uses 100base-TX half-duplex.
Uses 100base-TX full-duplex.
Good Indicates good signal strength.
Acceptable Indicates marginal signal strength.
Low Indicates insufficient signal strength.
No Reception Indicates that no signal is received.
Displays the name that identifies the wireless network.
Displays the encryption type.
No Security
WEP
1
-PSK-AES
WPA2*
Mixed Mode PSK
®
.
is set to .
Wi-Fi On
is set to .
Wi-Fi On
Understanding the Printer Menus
137