Dell E525w User Manual page 32

WPS-PIN
The PIN code of WPS-PIN can only be configured from the operator panel.
NOTE:
WPS-PIN is available only when the wireless LAN access point (Registrar) or router supports WPS-PIN.
NOTE:
A password is required to enter
password you specified, and press the
1 Press the (Menu) button.
2 Press the
button until System is highlighted, and then press the
3 Press the button until Admin Menu is highlighted, and then press the
4 Press the
button until Network is highlighted, and then press the
5 Press the button until WPS Setup is highlighted, and then press the
6 Press the button until PIN Code is highlighted, and then press the
7 Write down the displayed 8-digit PIN code or select Print PIN Code to print the PIN code.
8 Ensure that Start Configuration is highlighted, and then press the
9 Ensure that WPS AP Searching is displayed, and enter the PIN code you checked in step 7 into the wireless
LAN access point (Registrar) or router.
NOTE:
For WPS operation on the wireless LAN access point (Registrar) or router, refer to the manual supplied with the
product.
When the wireless LAN connection setting is completed, the
Auto SSID Setup
NOTE:
A password is required to enter
password you specified, and press the
1 Press the
(Menu) button.
2 Press the button until System is highlighted, and then press the
3 Press the button until Admin Menu is highlighted, and then press the
4 Press the button until Network is highlighted, and then press the
5 Press the button until Wireless Setup is highlighted, and then press the
The printer automatically searches the access points on wireless network.
6 Press the button until the desired access point is highlighted, and then press the
If the desired access point does not appear, go to "Manual SSID Setup" on page 33.
NOTE:
Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.
7 Enter the passphrase or WEP key.
When the encryption type of the selected access point is WPA, WPA2 or Mixed in step 6:
• Enter the passphrase, and then press the
When the encryption type of the selected access point is WEP in step 6:
• Enter the WEP key, and then press the
NOTE:
A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 bytes ASCII or 8 to 64
bytes Hex. It may be described as a key on some access points or routers. For details, refer to the manual supplied with the
access point or router.
When the wireless LAN connection setting is completed, the
32
Connecting Your Printer
when
Admin Menu Panel Lock Set
(Set) button.
when
Admin Menu Panel Lock Set
(Set) button.
(Set) button.
(Set) button.
is set to . In this case, enter the
Enable
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Wi-Fi | WPS) button lights up.
is set to . In this case, enter the
Enable
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Wi-Fi | WPS) button lights up.