Changing The Default Copy Settings; Using Special Copy Features; Reducing Or Enlarging Copies; To Select From The Predefined Copy Sizes - Dell 1133 Mono Laser User Manual

User's guide (html)
Hide thumbs Also See for 1133 Mono Laser:
Table of Contents

Advertisement

4. Press the left/right arrow until the image mode you want appears and press OK.
Text: Use for originals containing mostly text.
Text/Photo: Use for originals with mixed text and photographs.
Photo: Use when the originals are photographs.
5. Press Stop/Clear ( ) to return to ready mode.

Reducing or enlarging copies

By using the Reduce/Enlarge (
400% when you copy original documents from the scanner glass.

To select from the predefined copy sizes:

1. Press Reduce/Enlarge (
2. Press the left/right arrow until the size setting you want appears and press OK.
3. Press Stop/Clear ( ) to return to ready mode.
To scale the copy by directly entering the scale rate:
1. Press Reduce/Enlarge (
2. Press the left/right arrow until Custom appears and press OK.
3. Press the left/right arrow or numeric keypad to enter the copy size you want. Pressing and holding the
left/right arrow allows you to quickly scroll to the number you want.
4. Press OK to save the selection.
5. Press Stop/Clear ( ) to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of your copy.

Changing the default copy settings

The copy options, including darkness, original type, copy size, collation, and number of copies, can be set to those
most frequently used. When you copy a document, the default settings are used unless they have been changed by
using the corresponding buttons on the control panel.
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Copy Setup appears and press OK.
3. Press the left/right arrow until Change Default appears and press OK.
4. Press the left/right arrow until the setup option you want appears and press OK.
5. Press the left/right arrow until the setting you want appears and press OK.
6. Repeat steps 5 through 6, as needed.
7. Press Stop/Clear ( ) to return to ready mode.
While you are setting copy options, pressing Stop/Clear ( ) cancels the changed settings and restores the
defaults.

Using special copy features

You can use the following copy features:

ID card copying

Your machine can print 2-sided originals on one sheet of A4-, Letter-, Legal-, Folio-, Executive-, B5, A5, or A6-
sized paper.
The machine prints one side of the original on the upper half of the paper and the other side on the lower half
without reducing the size of the original. This feature is helpful for copying a small-sized item, such as a business
card.
The size of the 2-sided originals should be smaller than A5, if not, some of it won't be copied.
1. Press ID Copy (
) button, you can reduce or enlarge the size of a copied image from 25% to
) on the control panel.
) on the control panel.
)on the control panel.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents