Status of Wi-Fi | WPS Button Backlight
This section describes when the backlight of the
For more information, see "Wireless Problems" on page 306.
Wi-Fi | WPS button backlight
Off
On
Blinking
Blinking slowly
1
*
You can enable/disable the
72
Operator Panel
(Wi-Fi | WPS) button lights up or blinks.
Printer status
Wi-Fi
*1
settings
N/A
Connecting to the network via Ethernet cable. Wireless connection is not
available when an Ethernet cable is connected to the printer
-
Off
On
The printer enters Sleep/Deep Sleep mode
Failed to connect with wireless LAN access point or router
Wireless link established
On
On
Searching with wireless LAN access point or router
Connecting with wireless LAN access point or router
On
Wi-Fi
settings. For more information, see "Wi-Fi" on page 142.