CreatBot DS User Manual page 25

Interface
1. Load 3D model, supporting the files of STL/OBJ/DAE/AMF.
Note: The Program can also recognize planar images, and transfer them to 3D model files. Support image file
formats include JPG/BMP/PNG.
2. Save as Gcode file
3. If change any slicing setting, please click this "Slice" button to show the real printing time and filament
requirement.
4. Printing time, the length and weight of filament consume.
5. Simulate the printing process under different modes.
5.1 Normal: Default state
5.2 Overhang: Measure the angle of overhang, and judge if it is necessary to generate the support structure
5.3 X‐Ray: X‐ray vision
5.4 Layers: Layer by layer to simulate the printing process