Upgrade The Firmware And Reboot The Intercom - CyberData 011030 Operation Manual

2.4 Upgrade the Firmware and Reboot the Intercom

Note
Note
To upload the Intercom firmware from your PC:
1. Set up a TFTP server.
2. Retrieve the latest Intercom firmware from the VoIP Indoor Intercom product page at:
3. Unzip the Intercom version file. This file may contain the following:
•
•
4. Copy the firmware files to be upgraded to the appropriate TFTP server directory:
•
•
5. Log in to the Intercom home page as instructed in
Operations Guide
To guard against failed firmware upgrades, speakers shipped from CyberData with
firmware version 5.1.1 and later feature a built-in "fail safe" mechanism. Note that field
upgrading earlier units with v5.x.x will not allow for this feature.
The Intercom will store the TFTP Server IP and New Filename entered on the Update
Firmware web page. If, during the boot process, the Intercom is unable to boot the
firmware, it will attempt to download the stored image from the stored TFTP server.
If you do not already have a TFTP server running on your network, see
a TFTP Server".
http://www.cyberdata.net/support/voip/index.html
Firmware file
Release notes
c:\tftp-root\for Windows
/tftpboot/for Linux
Home Page".
Section 2.3.1, "Log in to the Configuration
930260D
Installing the VoIP Indoor Intercom
Parts List
Appendix B, "Setting up
CyberData Corporation
37