Web Page Item
Remote SIP Port*
Local SIP Port*
SIP User ID*
Authenticate ID*
Authenticate Password*
Register with a SIP Server*
Re-registration Interval (in seconds)*
Unregister on Reboot
Dial Out Settings
Dial Out Extension
Extension ID
Operations Guide
Table 2-7. SIP Configuration Parameters
Description
Enter the Remote SIP Port number (default 5060).
Enter the Local SIP Port number (default 5060).
Enter the SIP User ID (up to 25 alphanumeric characters).
Enter the Authenticate ID (up to 25 alphanumeric
characters).
Enter the Authenticate Password (up to 25 alphanumeric
characters).
Check this box to enable SIP Registration.
For information about the Point-to-Point Configuration, see
Section 2.3.4.1, "Point-to-Point
Enter the SIP Registration lease time in seconds
(default 60 seconds).
Check this box to disable the SIP registration after a
reboot.
Enter the desired dial-out extension number.
Note: The Dial Out Extension also supports the addition of
comma delimited pauses before sending additional DTMF
tones (using rfc2833). The first comma will pause three
seconds after a call is first established with a remote
device. Subsequent commas will pause for two seconds. A
pause of one second will be sent after each numerical digit.
Examples of Dial-Out Extension strings:
302: Dial out extension 302 and establish a call.
302,2: Dial out extension 302 and establish a call. Wait
three seconds and then send the DTMF tone '2'.
302,25,,,4,,1: Dial out extension 302 and establish a call.
Wait 3 seconds and then send the DTMF tone '2'. Send out
DTMF tone 5. Wait six seconds. Send out DTMF tone 4.
Wait four seconds. Send out DTMF tone 1.
Note: The maximum number of total characters in the dial-
out field is 25.
Type the desired ID name for the dial out extension.
Link to the Home page.
Link to the Device Configuration page.
Link to the Networking page.
Link to go to the SIP Configuration page.
930260D
Installing the VoIP Indoor Intercom
Parts List
Configuration".
CyberData Corporation
26
Need help?
Do you have a question about the 011030 and is the answer not in the manual?
Questions and answers