Configure The Network Parameters - CyberData 011030 Operation Manual

2.3.3 Configure the Network Parameters

1. Click the Networking button to open the Network Configuration page
2. On the Network Configuration page, enter values for the parameters indicated in
Web Page Item
IP Addressing
Network Settings
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
Operations Guide
Figure 2-13. Network Configuration Page
Table 2-6. Network Configuration Parameters
Description
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
go to Step 3.
Enter the Static IP address.
Enter the Subnet Mask address.
Enter the Default Gateway address.
Enter the DNS Server 1 address.
Enter the DNS Server 2 address.
Link to the Home page.
Link to the Device Configuration page.
930260D
Installing the VoIP Indoor Intercom
Parts List
(Figure 2-13).
Table 2-6.
Table 2-6
. If you select DHCP,
CyberData Corporation
23