Configure The Intercom Parameters - CyberData 011030 Operation Manual

2.3 Configure the Intercom Parameters

To configure the Intercom online, use a standard web browser.
Configure each Intercom and verify its operation before you mount it. When you are ready to mount
an Intercom, refer to
All Intercoms are initially configured with the following default IP settings:
When configuring more than one Intercom, attach the Intercoms to the network and configure one
at a time to avoid IP address conflicts..
Parameter
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
Operations Guide
Appendix A, "Mounting the Indoor Intercom"
a
a
a
a. Default if there is not a DHCP server present.
Table 2-3. Factory Default Settings
Factory Default Setting
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
930260D
Installing the VoIP Indoor Intercom
for instructions.
CyberData Corporation
15
Parts List