Configure The Sip Parameters - CyberData 011030 Operation Manual

2.3.4 Configure the SIP Parameters

1. Click SIP Config to open the SIP Configuration page
Note
2. On the SIP Configuration page, enter values for the parameters indicated in
Web Page Item
SIP Settings
SIP Server*
Outbound Proxy
Operations Guide
For specific server configurations, go to the VoIP Indoor Intercom product page at:
http://www.cyberdata.net/support/voip/index.html
Figure 2-14. SIP Configuration Page
Table 2-7. SIP Configuration Parameters
930260D
(Figure 2-14).
Description
Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Enter the Outbound Proxy as either a numeric IP address
in dotted decimal notation or the fully qualified host name
(FQHN) up to 64 characters.
Installing the VoIP Indoor Intercom
Parts List
Table 2-7.
CyberData Corporation
25