Random Access - Madrigal Imaging MP-8, MP-9 Owner's Manual

OPERATION
Random Access ➤
Convergence
3.30
Press from the Convergence menu to
3
select Random Access Convergence. A red
and green crosshatch is displayed with a
rectangular box at the center zone. Above
the box, "CONV" indicates that the zone
is ready for convergence. Use the arrow
keys to move the red onto the green within
the box. This affects the position of the red
with respect to the green over the entire
screen (static convergence).
To change the convergence
color, press . Each
COLOR
press of the Color key
changes the color as shown.
To move to another control
point, press . The
ENTER
caption above the box changes to "MOVE."
Use the arrow keys to move to another
zone for convergence. Press
converge the zone. When all zones
requiring adjustment are converged, press
to display the Exit dialog box. Press
EXIT
to save the new convergence settings.
ENTER
To go back to the convergence screen,
move the cursor bar to "Continue Adjust",
then press . To discard your changes,
ENTER
select "No Save."
Note: may be used instead of
CONV
functions, if preferred.
SEQUENCE REFERENCE
Press: COLOR
1. COLOR green
2. COLOR again red
3. COLOR again a white crosshatch for reference
4. COLOR again repeat starting at green-red
to
ENTER
to alternate between converge and move
ENTER
CONV
CONVERGENCE
COLOR
blue
blue
CONV