Table of Contents
Advertisement
OPERATION
Audio ➤
Mute
Functions
The Mute function is used to silence audio output.
To silence the audio output, press
. Press
again to restore audio.
MUTE
MUTE
Volume
The Volume function is used to adjust the audio output level.
To adjust Volume, press
then
or
until the desired audio level is
VOL
attained.
System Status ➤
The projector's current operating
settings may be displayed by
Pages
pressing
while at operation
level. Each time
is pressed, one
of three main status pages is dis-
played. To return to operation
level, press
.
EXIT
Page 1 displays general projector
information and operating settings
which include identity, software
version, date and time, keypad
type, scan configuration, auto
power-up setting, message display
setting, switchers (numbers) con-
nected, installed options, and
mute setting. Operating settings
are explained in the following
entries in this section.
Page 2 displays current input
parameters. These parameters
(defined later in this section),
relate specifically to the currently
selected input.
3.9
Advertisement
Table of Contents
