Asr/Asi Logic Diagrams - Madrigal Imaging MP-8, MP-9 Owner's Manual

ASR/ASI Logic Diagrams

A change in scan frequency is detected.
The change is greater than 100 Hz horizontal
or greater than 1 Hz vertical.
Is ASR
no
set to On for the
currently selected
input?
Do nothing.
Change the current
setup memory to the
matched Input memory.
Adjustments made at
this point are stored
in the current
setup memory.
ASR Logic Diagram
A source, Recall memory, or channel was manually
selected. The H & V scan frequencies of the source
yes
Check the
match
Input memory of the
currently selected input for
matching H & V scan
frequencies.
match match
Change the current
setup memory to the
matched Recall memory.
do not match that of the selected setup memory.
Is ASR
yes
set to On for the
selected
input?
no match
Search for a
Recall memory with
matching H & V scan
frequencies.
match match
Input memory with
matching H & V scan
Use the display settings
of the matched Input
memory but do not update
the current setup memory.
Adjustments made at this
point are displayed but
NOT stored in the current
Appendix C
no
Switch to the selected
source and/or setup
memory.
no match
ASI
Logic
Begins
Search for an
no match
frequencies.
Create new display set-
tings by interpolating the
ASI
two closest setup mem-
Functions
ories (in freq.). Do not
update the setup memory.
setup memory.
B.3