Madrigal Imaging MP-8, MP-9 Owner's Manual page 67

Top
GEOM 4
The Top function adjusts the level (Top Key)
and pincushion (Top Pin) of the top half of
the display image. The four displays shown
here demonstrate Top adjustments.
To stretch the upper left or right corner up
or down, select Top from the Geometry menu
and press
press or
is as curved or as straight as desired.
Bottom
GEOM 5
The Bottom function adjusts the level
(Bottom Key) and pincushion (Bottom
Pin) of the bottom half of the display image.
The four displays shown at right demonstrate
Bottom adjustments.
To stretch the lower left or right corner up or
down, select Bottom from the Geometry menu
and press
press or
is as curved or as straight as desired.
Bow
GEOM 6
The Bow function adjusts horizontal bowing
(H Bow) across an image. It also adjusts
vertical curvature (V Bow) in the middle
of the picture. The four displays at right
demonstrate H Bow and V Bow adjustments.
To adjust H bow, select Bow from the
Geometry menu then press
the image appears as desired. To adjust V Bow,
press or
as curved or as straight as desired.
or . To adjust top pincushion,
until the top half of the image
or . To adjust bottom pincushion,
until the bottom half of the image
or
until the center of the picture is
until
OPERATION
3.25