Table of Contents
Advertisement
Top Plate
Lens/CRT
Securing Bolts
Center
Focus Adjust
Corner
Focus Adjust
Figure 2-21b. MP-8 Lens Assemblies - Top View
For the MP-9: The lenses are secured to the projector frame by a top plate
and individual mounting plates as shown in Figures 2-21a and 2-22a.
During optical alignment, adjust the top plate securing bolts using the ball
nose screw driver (
mounting plate securing bolts using either the ball nose screwdriver or the
projector wrench (
are labeled B-C-D.
Top/Bottom
Focus Adjust
Left/Right
Focus Adjust
Lens
Mounting
Plate
Figure 2-22a. MP-9 Lens Assemblies - Front View
For the MP-8: The lenses are secured to the projector frame by a top plate as
shown. During optical alignment, adjust the securing bolts as instructed —
refer to Figures 2-21b and 2-22b. The securing bolts are labeled A-B-C-D.
A
A
D
D
C
Blue
Green
) supplied with the projector. Adjust the
) supplied, as necessary. The securing bolts
Blue
Green
D
C
INSTALLATION & SETUP
A
A
C
B
B
Red
Red
B
2.19
Advertisement
Table of Contents
