Table of Contents
Advertisement
INSTALLATION & SETUP
2.3 Hardware
Setup
Keypad ➤
Conversion
2.8
SQUARE ROOMS
Corner placement of screen
yields best audience coverage.
Prime Audience
Area
Figure 2-5. Screen Locations for Maximum Audience Coverage
This section explains: how to convert the keypad from a built-in keypad to
a remote keypad, how to change keypad protocol and backlit settings, and
how to determine if reverse scan setup is required.
The projector includes a multi-use full-function keypad which may be
configured for use as a built-in, IR remote, or wired remote keypad. The
keypad is configured at the factory for built-in use. It is located below the
front top cover. You can use the keypad as it is or re-configure it for
remote operation. You can also "hard wire" the keypad to be a protocol A
or protocol B keypad (see section 3.7, Utility Features for information
about keypad protocols).
RECTANGULAR ROOMS
Screen placement along short
wall yields best audience coverage.
Prime Audience
Area
Advertisement
Table of Contents
