Table of Contents
Advertisement
OPERATION
Guided ➤
Convergence
3.28
The following options are available while performing any of the manual
convergence routines:
Convergence on Image
When a convergence method is first selected, an internally generated
crosshatch test pattern is displayed. Alternatively, you may override the
use of the test pattern and have the external image displayed. Press
cycle to the external image.
Convergence Reset
During convergence, the following reset options are available:
• Press
to reset red and blue convergence – static and dynamic.
0
• Press
to reset red and blue convergence – static only.
1
• Press
to reset red and blue convergence – dynamic only.
2
"Static" refers to the complete image. "Dynamic" refers to a zonal area.
Note: Allow the projector to warm up for at least forty five minutes prior to
convergence registration.
Press
from the Convergence menu to select Guided Convergence. An
1
internally generated crosshatch is displayed for the alignment. Initially, a red
and green crosshatch is displayed and a rectangular box surrounds the center
convergence zone. Use , , , and
the zone. Press
to similarly move the blue onto the green. These first
ENTER
two adjustments adjust the position of the red and blue images with respect
to the green over the entire screen (static adjustments). The adjustments to
follow (dynamic), modify color positioning within individual zones.
Press
to move the rectangular box to the next convergence zone. Again,
ENTER
use the arrow keys to adjust the red on the green. Press
blue on the green.
to move the red onto the green in
to adjust the
ENTER
to
#
Advertisement
Table of Contents
