Ppp General Setup - Draytek Vigor2960 Series User Manual

4 . 9 . 4 P P P G e n e r a l
4 . 9 . 4 P P P G e n e r a
Remote users can connect to the site, host, server and etc. via VPN connection built between
the router and the users by authentication procedure.
4 . 9 . 4 . 1 P P T
4 . 9 . 4 . 1 P P T
This page display current status for VPN tunnel built with PPTP protocol.
Available parameters are listed as follows:
Item
MPPE Encryption
User Authentication
Type
LDAP profiles
DHCP from
DHCP Relay
S e t u p
l S e t u p
P
P
Description
Specify one of the encryptions for such server. It is available
only when MS-CHAP or MS-CHAP_v2 is selected.
Set user authentication to Local server or RADIUS server.
Choose a LDAP profile for PPTP Server if LDAP is selected
as user authentication type.
To clear the selected one, click
selections.
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
Enable - Let the router assign IP address to every host in the
LAN.
Disable - Let you manually assign IP address to every host
304
to remove current object
Vigor2960 Series User's Guide