Draytek Vigor2960 Series User Manual page 322

Proposal (Dial-Out)
IKE Phase2
Authentication
(Dial-Out)
Accepted Proposal
(Dial-In)
Apply
Cancel
7. Enter all of the settings and click Apply.
8. A new IPsec LAN-to-LAN profile has been created.
H o w t o c r e a t e a P
H o w t o c r e a t e a P
Below will guide you to create a PPTP dial-out profile for VPN connection:
1. Open VPN and Remote Access >> VPN Profiles.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
encryption algorithms to the VPN peers, and get its feedback
to find a match.
Propose the local available algorithms to the VPN peers, and
get its feedback to find a match.
For the dial-in VPN user, please specify the limitation of the
proposal.
acceptall - When the VPN tunnel is established, all the
proposals supported by this device will be accepted and
applied.
acceptabove - When the VPN tunnel is established, only the
selected proposal will be accepted and applied by this
device.
Click it to save the configuration.
Click it to exit the page without saving configuration.
P T P D i a l - O u t V P N
P T P D i a l - O u t V P N
314
p r o f i l e
p r o f i l e
Vigor2960 Series User's Guide