Draytek Vigor2960 Series User Manual page 365

3. The QoS settings page appears.
Available parameters are listed as follows:
Item
QoS WAN
Status
Bandwidth
High/Medium/
Normal/Low
Apply
Cancel
4. Enter all of the settings and click Apply.
Vigor2960 Series User's Guide
Description
Use the drop down list to set WAN interface for QoS by
choosing one of the WAN interfaces.
Enable – Click it to enable such profile.
Disable – Click it to disable the QoS profile.
Type the number as the total transmission rate for the
outgoing /incoming data. The range can be set from 64000 to
10000000.
Click the unit (Kbps or Mbps) for such rate.
There are several available outgoing queues. All queues in
the data group to be initialized with weights of zero,
resulting in a strict service to completion (STC) mechanism
across all queues.0.
Type the weight of queues in bytes, range from 0 to
1000000.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
357