Draytek Vigor2960 Series User Manual page 396

FTP Port
Server Certificate
Access List
IP List
Apply to LAN
Allow Ping from WAN
Allow Ping form LAN
Default: Disable
Auto-Logout
Apply
Cancel
Enter all of the settings and click Apply.
Type the port number for the management through FTP
server.
Use the default setting.
Click Enable to allow system administrator to login from the
user defined IP address and management the web page of the
router. If you enable such function, the system can be
managed by these three IP addresses via WAN.
Type the first IP address for the system administrator to
login.
The former boxes indicate the IP address allowed to login to
the router, and the later box indicates a subnet mask allowed
to login to the router.
Choose the LAN profile(s) that the IPs controlled under such
profile are allowed to access into the web user interface of
Vigor2960.
Click Enable to allow system administrator to ping the router
from WAN interface.
Click Enable to allow system administrator to ping the router
from LAN interface.
Click Enable to disable the function of Auto-Logout of
Vigor router.
Click this button to save the configuration and exit the web
page.
Click it to discard the settings configured in this page.
388
Vigor2960 Series User's Guide