Ppp General Setup - Draytek Vigor2860 Series User Manual

3 . 1 1 . 2 P P P G e n e
3 . 1 1 . 2 P P P G e n e
This submenu only applies to PPP-related VPN connections, such as PPTP, L2TP, L2TP over
IPsec.
Available settings are explained as follows:
Item
Dial-In PPP
Authentication
Dial-In PPP Encryption
(MPPE)
r a l S e t u p
r a l S e t u p
Description
PAP Only - elect this option to force the router to
authenticate dial-in users with the PAP protocol.
PAP/CHAP/MS-CHAP/MS-CHAPv2 - Selecting this
option means the router will attempt to authenticate dial-in
users with the CHAP protocol first. If the dial-in user does
not support this protocol, it will fall back to use the PAP
protocol for authentication.
Optional MPPE - This option represents that the MPPE
encryption method will be optionally employed in the
router for the remote dial-in user. If the remote dial-in user
does not support the MPPE encryption algorithm, the router
will transmit "no MPPE encrypted packets". Otherwise, the
MPPE encryption scheme will be used to encrypt the data.
Require MPPE (40/128bits) - Selecting this option will
force the router to encrypt packets by using the MPPE
encryption algorithm. In addition, the remote dial-in user
will use 40-bit to perform encryption prior to using 128-bit
for encryption. In other words, if 128-bit MPPE encryption
method is not available, then 40-bit encryption scheme will
269
Vigor2860 Series User's Guide