Draytek Vigor2960 Series User Manual page 392

4 4 . . 1 1 5 5 . . 4 4 . . 2 2 S S y y s s l l o o g g A A c c
To configure settings for Syslog, open System Maintenance>>Syslog/Mail Alert and click
the Syslog Access Setup tab.
Available parameters are listed as follows:
Item
Status
Log to USB
Server IP
Server Port
Router Name
Firewall Log
VPN Log
c c e e s s s s S S e e t t u u p p
Description
Choose one of the selections to determine current status for
Syslog access. If you choose Local as Status, you don't need
to type any server IP and port. Just give a name for the
router.
Enable – Click it to save the log onto USB disk.
Disable – Click it to disable the function of log to USB.
USB Syslog Keep Days – Type the days that USB disk will
keep the log without deleting.
Type the IP address of the Syslog server.
It is available when Remote or Both is selected as Status.
Type the port number for the Syslog server.
It is available when Remote or Both is selected as Status.
Type the name of the router. The default name is Vigor.
Click Enable to make the firewall log recorded in the
Syslog.
Click Enable to make the VPN log recorded in the Syslog.
384
Vigor2960 Series User's Guide