Draytek Vigor2960 Series User Manual page 313

NetBIOS Naming
Packet
PPTP Acceleration
Apply
Cancel
4 . 9 . 4 . 2
4 . 9 . 4 . 2
This page display current status for VPN tunnel built with L2TP protocol.
Available parameters are listed as follows:
Item
Authenticate Protocol
User Authentication
Vigor2960 Series User's Guide
in the LAN.
Pass – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Block – When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Enable – Click it to make PPTP acceleration for VPN.
Click it to save the configuration.
Click it to discard the settings configured in this page.
L 2 T P
L 2 T P
Description
The router will authenticate the dial-in user with the
protocol selected here.
PAP - It means the router will attempt to authenticate
dial-in users with the PAP protocol.
CHAP - It means the router will attempt to authenticate
dial-in users with the CHAP protocol.
Set user authentication to Local server or RADIUS server.
305