Draytek Vigor2960 Series User Manual page 73

Different IPv4 and IPv6 protocol types specified will bring up different configuration
web page.

If you choose Static as IPv4 protocol type, click the Static tab to open the following
page:
Available parameters are listed as follows:
Item
IP Address
Subnet Mask
Gateway IP
Address
DNS Server IP
Address
IP Alias
Vigor2960 Series User's Guide
Description
Type the IP address specified for such profile.
Use the drop down list to choose the subnet mask for such
profile.
Type a public gateway address for such WAN profile.
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny
boxes one by one.
Save – After finished the IP address configuration, click
Save to save the setting onto the router.
Type other IP addresses to be bound to this interface. This
65