Draytek Vigor2960 Series User Manual page 272

Item
Server IP Address
Port
Common Name
Identifier
Base DN
Group DN
Regular DN
Regular Password
H o w t o c r e a t e a n
H o w t o c r e a t e a n
1. Open User Management>>LDAP/Active Directory.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item
Profile
Enable This Profile
Description
Display the IP address of the LDAP server.
Display the port number set for such profile.
Display the name for identification.
Display the configured Base DN if Bind Type is set with
Simple Mode.
Display the configured Group DN if Bind Type is set with
Simple Mode.
Display the configured regular DN if Bind Type is set with
Regular Mode.
Display the configured regular password if Bind Type is set
with Regular Mode.
e w L D A P / A c t i v e D
e w L D A P / A c t i v e D
Description
Type a name for such profile.
Check this box to enable such profile.
264
i r e c t o r y P r o f i l e
i r e c t o r y P r o f i l e
Vigor2960 Series User's Guide