Welding Task Selection; Welding Current Setting; Arcforce; Hotstart - EWM Taurus 355 Basic TDM Operating Instructions Manual

Design and function
MMA welding

5.12.2 Welding task selection

5.12.2.1 Welding current setting

The welding current is normally set using the "Wire speed" rotary dial.
Operating
element

5.12.2.2 Arcforce

Operating
element

5.12.2.3 Hotstart

The hotstart device improves the ignition of the stick electrodes using an increased ignition current.
a) = Hotstart time
b) = Hotstart current
I = Welding current
t = Time

5.12.2.4 Antistick

42
Action Result
Welding current is set
Action Result
Select arcforcing welding parameter
LED for the button
Arcforcing setting for electrode types:
(Setting range -40 to 40)
Negative values
Values around zero Basic
Positive values
Anti-stick prevents the electrode from annealing.
If the electrode sticks in spite of the Arcforce device, the machine
automatically switches over to the minimum current within about 1
second to prevent the electrode from overheating. Check the welding
current setting and correct according to the welding task!
Figure 5-18
is on.
Rutile
Cellulose
Figure 5-19
Figure 5-20
Displays
Setpoint setting
Display
099-005221-EW501
16.04.2014