Installation - EWM Taurus 355 Basic TDM Operating Instructions Manual

Using protective dust caps!
Protective dust caps protect the connection sockets and therefore the machine against
dirt and damage.
•
The protective dust cap must be fitted if there is no accessory component being operated
on that connection.
•
The cap must be replaced if faulty or if lost!
Observe documentation of other system components when connecting!
5.1

Installation

Risk of accident due to improper transport of machines that may not be lifted!
Do not lift or suspend the machine! The machine can fall down and cause injuries! The
handles and brackets are suitable for transport by hand only!
•
The machine may not be lifted by crane or suspended!
•
Depending on machine type, equipment for lifting by crane or use while suspended is
available as a retrofitting option (see chapter "Accessories").
Installation site!
The machine must not be operated in the open air and must only be set up and
operated on a suitable, stable and level base!
•
The operator must ensure that the ground is non-slip and level, and provide sufficient
lighting for the place of work.
•
Safe operation of the machine must be guaranteed at all times.
099-005221-EW501
16.04.2014
CAUTION
NOTE
WARNING
CAUTION
Design and function
Installation
23