Ambient Conditions; In Operation; Transport And Storage - EWM Taurus 355 Basic TDM Operating Instructions Manual

2.4.1

Ambient conditions

Installation site!
The machine must not be operated in the open air and must only be set up and
operated on a suitable, stable and level base!
•
The operator must ensure that the ground is non-slip and level, and provide sufficient
lighting for the place of work.
•
Safe operation of the machine must be guaranteed at all times.
Equipment damage due to dirt accumulation!
Unusually high quantities of dust, acid, corrosive gases or substances may damage the
equipment.
•
Avoid high volumes of smoke, vapour, oil vapour and grinding dust!
•
Avoid ambient air containing salt (sea air)!
Non-permissible ambient conditions!
Insufficient ventilation results in a reduction in performance and equipment damage.
•
Observe the ambient conditions!
•
Keep the cooling air inlet and outlet clear!
•
Observe the minimum distance of 0.5 m from obstacles!
2.4.1.1

In operation

Temperature range of the ambient air:
•
-25 °C to +40 °C
Relative air humidity:
•
Up to 50% at 40 °C
•
Up to 90% at 20 °C
2.4.1.2

Transport and storage

Storage in an enclosed space, temperature range of the ambient air:
•
-30 °C to +70 °C
Relative air humidity
•
Up to 90% at 20 °C
099-005221-EW501
16.04.2014
CAUTION
CAUTION
Safety instructions
Transport and installation
13