EWM Taurus 355 Basic TDM Operating Instructions Manual page 45

Display
099-005221-EW501
16.04.2014
ENTER
0
l
Setting/selection
Ramp time for wire inching
0 = normal inching (10s ramp time)
1 = fast inching (3s ramp time) (Ex works)
Lat. and sp. lat. tapping start
0 = no latched tapping start (Ex works)
1 = latched tapping start possible
Support for wire feeders with voltage-sensing.
0 = Function switched off
1 = Function switched on (ex works)
Alternative remote control coding (FRC)
0 = no alternative remote control coding (works setting)
1-15 = alternative remote control coding
Design and function
Special parameters (advanced settings)
+
Figure 5-23
EXIT
45