Fuji Xerox DocuPrint CM115 w User Manual page 154

4
To fill in the fields, enter the information as follows:
1 Name
2 Server Type
3 Computer Settings Wizard
4 Server Name / IP Address
5 Share Name
6 Path
7 Login Name
8 Login Password
9 Confirm Login Password
10 Port Number
5
Click OK.
6
Click the Save Device Address Book icon on the toolbar.
After you configured settings, see "Sending the Scanned File to the Network" on page 155.
154 Scanning
Enter a friendly name that you want it to appear on the Address Book.
Select Computer if you store the document in a shared folder of your
computer.
Select Server if you use a FTP server.
For Computer only.
Clicking this button opens the wizard screen which guides you through several
steps.
When you complete the steps in the wizard, the settings for Server Address
are automatically configured. For details, click Help.
Enter a server name or IP address of your computer or the FTP server that
you have shared out.
The following are examples:
• For Computer:
Server name: myhost
IP address: 192.0.2.0
• For Server:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.0.2.0
For Computer only.
Enter the name of the shared folder on the recipient computer.
For Computer
To store the scanned document in the share folder directly without creating
any subfolder, leave the space blank.
To store the scanned document in the folder you created under the share
folder, enter the path as following.
Example: Share Folder name: MyShare, Second-level folder name: MyPic,
Third-level folder name: John
You should now see MyShare\MyPic\John in your directory.
MyShare (Share folder)
MyPic
John
In this case, enter the following item.
Path: \MyPic\John
For Server
Enter the path to store the scanned document.
Enter the user account name that has access to the shared folder on your
computer or FTP server.
Enter the password corresponding to the above login name.
NOTE:
• Empty password is not valid in the Scan to Server/Computer feature. Make
sure that you have a valid password for the user login account. (See
"Confirming a Login Name and Password" on page 140 for details on how
to add a password in your user login account).
Re-enter your password.
Enter the port number. If you are unsure, you can enter the default value of
139 for SMB and 21 for FTP.