Adjusting Color Registration; Performing Auto Correct - Fuji Xerox DocuPrint CM115 w User Manual

Adjusting Color Registration

This section describes how to adjust the color registration when you first install the printer or after moving it to a new
location.
 Performing Auto Correct
Auto Correct allows you to correct the color registration automatically.
Using the Operator Panel
1
Press the System button.
2
Select Admin Menu, and then press the
3
Select Maintenance, and then press the
4
Select Adjust ColorRegi, and then press the
5
Select Auto Adjust, and then press the
6
Select Yes, and then press the
Auto Correct is performed.
Using the Printer Setting Utility (Windows Only)
The following procedure uses Windows 7 as an example.
1
Click Start  All Programs
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility opens.
2
Click the Printer Maintenance tab.
3
Select Registration Adjustment from the list at the left side of the page.
The Registration Adjustment page is displayed.
4
Deselect the check box next to On.
5
Click Start next to Auto Correct.
The color registration is corrected automatically.
button.
button.
button.
button.
 Fuji Xerox  Fuji Xerox Printer Software for Asia-Pacific
button.
 your printer
Troubleshooting

221