Tray Settings - Fuji Xerox DocuPrint CM115 w User Manual

 Tray Settings
Use the Tray Settings menu to set the paper size and paper type loaded in the multipurpose feeder (MPF).
MPF
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
Purpose:
To specify the default paper size loaded in the MPF.
Values:
Paper Size
Paper Type
NOTE:
• For more information on supported paper sizes, see "Usable Print Media" on page 82.
186 Using the Operator Panel Menus and Keypad
A4 (210  297mm)*
A5 (148  210mm)
B5 (182  257mm)
Letter (8.5  11")
Folio (8.5  13")
Legal (8.5  14")
Executive (7.25  10.5")
Envelope #10 (4.19.5")
Monarch Env. (3.97.5")
Monarch Env. L (7.53.9")
DL Env. (110220mm)
DL Env. L (220110mm)
C5 Envelope (162  229mm)
Custom Size Portrait(Y)
Landscape(X)
Plain*
Bond
Light Card
LW Gloss Card
Labels
Recycled
Envelope
Plain S2
Bond S2
Light Card S2
LW Gloss Card S2
Recycled S2
Specifies the length of the
297mm*/11.7inch*
custom size paper.
127 – 355mm/5.0 –
14.0inch
Specifies the width of the
210mm*/8.3inch*
custom size paper.
77 – 215mm/3.0 –
8.5inch