Fuji Xerox DocuPrint CM115 w User Manual page 111

8
Select Group Owner, and then press the
For a mobile device with WPS-PBC
Select WPS Method, and then press the
a
Select PBC, and then press the
b
The printer is ready to use the WPS-PBC connection.
For a mobile device with WPS-PIN
Select WPS Method, and then press the
a
Select PIN Code, and then press the
b
The printer is ready to use the WPS-PIN connection.
9
Select Connection Status, and then press the
10
Confirm no device is connected with the Wi-Fi Direct connection.
NOTE:
• When other device is connected (the mobile device name is displayed on
Wi-Fi Direct connection.
Disconnect the other device from the Wi-Fi Direct network. For details, see "Disconnecting Wi-Fi Direct Network" on
page 113.
The printer is ready to use the Wi-Fi Direct connection.
• Connecting a Wi-Fi Direct Certified Mobile Device
The following is a typical procedure for connecting a mobile device to the printer using Wi-Fi Direct. The procedure
varies depending on the mobile device you are using. Refer to the manual provided with your mobile device.
1
From the mobile device, start the procedure to connect using Wi-Fi Direct.
2
When the invitation for Wi-Fi Direct connection appears on the LCD panel of the printer, press the
NOTE:
• If you want to change the printer's group role of the Wi-Fi Direct network, select Group Role under the Wi-Fi Direct
Setup menu.
• Connecting a Wi-Fi Direct Certified Mobile Device With PIN Code
The following is a typical procedure for connecting a mobile device to the printer using Wi-Fi Direct PIN code. The
procedure varies depending on the mobile device you are using. Refer to the manual provided with your mobile
device.
NOTE:
• Before you connect the mobile device to the printer, confirm that WPS Method is set to PIN Code.
1
From the mobile device, start the procedure to connect using Wi-Fi Direct PIN code.
2
When the invitation for Wi-Fi Direct connection appears on the LCD panel of the printer, press the
The PIN code is displayed on the LCD panel.
3
Input the PIN code to the mobile device.
• Connecting a Mobile Device That Is not Wi-Fi Direct Certified
1
Press the System button.
2
Select Admin Menu, and then press the
3
Select Network, and then press the
button.
button.
button.
button.
button.
button.
button.
button.
Connection Status ), you cannot use the
Printing Basics
button.
button.
111