Entering Values - Fuji Xerox DocuPrint CM115 w User Manual

 Entering Values
Using the Operator Panel
Enter the values that you found in the color registration chart to make adjustments.
1
Press the System button.
2
Select Admin Menu, and then press the
3
Select Maintenance, and then press the
4
Select Adjust ColorRegi, and then press the
5
Select Enter Number, and then press the
6
Confirm that LY, LM, and LC appear.
7
Press the or
8
Press the button once and move the cursor to the next color.
9
Repeat steps 7 and
10
Confirm that RY, RM, and RC appear.
11
Press the or
12
Press the button once and move the cursor to the next color.
13
Repeat steps 11 and
14
Confirm that Y, M, and C appear.
15
Press the or
16
Press the button once and move the cursor to the next color.
17
Repeat steps 15 and
18
Select Color Regi Chart, and then press the
19
Select Yes, and then press the
The color registration chart is printed with the new values.
20
Adjust until all straight lines are at the value of 0.
Viewing the images before and after will help.
224 Troubleshooting
button until you reach the value (for example, +3) displayed on the chart.
8 to enter all digits, and then press the
button until you reach the value (for example, +3) displayed on the chart.
12 to enter all digits, and then press the
button until you reach the value (for example, +3) displayed on the chart.
16 to enter all digits, and then press the
button.
button.
button.
button.
button.
button.
button.
button.
button.