• No Acct User Prt
Purpose:
To specify whether to permit the printing of data without authentication information.
Values:
Off*
On
• LetterH Dup Mode
Purpose:
To specify whether to print on both sides when you use letterhead.
Values:
*
Disable
Enable
• Low Toner Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
*
On
• FW Download Mode
Purpose:
To enable or disable download of firmware updates.
Values:
*
Enable
Disable
Maintenance Mode
Use the Maintenance Mode menu to initialize the NV (non-volatile) memory, configure the plain paper quality
adjustment settings, and configure the security settings.
NOTE:
•
Values marked by an asterisk (*) are the factory default menu settings.
• F/W Version
Purpose:
To confirm the current F/W version.
180
Using the Operator Panel Menus
Does not permit non-account user to print the data.
Permits non-account user to print the data.
Does not print on both sides of letterhead.
Prints on both sides of letterhead.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
Disables firmware updates.
Enables firmware updates.