Auger Mark - Fuji Xerox DocuPrint CM115 w User Manual

 Auger Mark
Problem
The printed result has auger mark.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local
representative office or an authorized dealer.
216 Troubleshooting
Action
The toner cartridges may be low or need to be replaced. Confirm the amount of
toner in each toner cartridge.
1 Check the toner level in the Consumables tab in the Printer Status window of
the SimpleMonitor.
2 Replace the toner cartridges as necessary.
Start Clean Developer.
1 Launch the Printer Setting Utility, and click Clean Developer on the Diagnosis
tab.
2 Click Start.