Fuji Xerox DocuPrint CM115 w User Manual page 166

Manual Setup
NOTE:
• This item is displayed only when Wi-Fi is set to On.
166 Using the Operator Panel Menus and Keypad
Specify a name to identify the wireless network. Up to 32 alphanumeric
Enter Network
characters can be entered.
(SSID)
Infrastructure Select to configure the wireless settings through the access point such as a
wireless router.
No Security
Mixed Mode
PSK
WPA2-PSK-AES
WEP
Select to configure the wireless setting without the access point such as a
Ad-hoc
wireless router.
No Security
WEP
Select to configure the wireless settings with no encryption
settings.
Select to configure the wireless settings with the Mixed
Mode PSK encryption. Mixed Mode PSK automatically
selects the encryption type from either WPA-PSK-AES or
WPA2-PSK-AES.
Specify the passphrase of 8 to 63
PassPhrase
alphanumeric (or 64 hexadecimal)
Entry
characters.
Select to configure the wireless settings with the WPA2-
PSK-AES encryption.
Specify the passphrase of 8 to 63
PassPhrase
alphanumeric (or 64 hexadecimal)
Entry
characters.
Select to configure the wireless settings with the WEP
encryption.
WEP Key Entry Specify the WEP key to use through the
wireless network. For 64bit keys, enter
10 hexadecimal characters. For 128bit
keys, enter 26 hexadecimal characters.
Select a transmit key from WEP Key 1,
Transmit Key
WEP Key 2, WEP Key 3, and WEP Key
4.
Select to configure the wireless settings with no encryption
settings.
Select to configure the wireless settings with the WEP
encryption.
WEP Key Entry Specify the WEP key to use through the
wireless network. For 64bit keys, enter
10 hexadecimal characters. For 128bit
keys, enter 26 hexadecimal characters.
Select a transmit key from WEP Key 1,
Transmit Key
WEP Key 2, WEP Key 3, and WEP Key
4.