Understanding Printer Messages - Fuji Xerox DocuPrint CM115 w User Manual

Understanding Printer Messages

The printer LCD panel displays messages describing the current state of the printer and indicates possible printer
problems you must resolve. This section describes error codes included in the messages, their meanings, and how
to clear the messages.
IMPORTANT:
• When an error message is displayed, the print data remaining on the printer and the information accumulated in the memory
of the printer are not secured.
Error Code
009-950
009-951
009-952
009-953
010-397
016-315
016-317
016-501
016-502
016-503
016-504
016-506
016-507
016-718
016-719
016-720
016-744
016-745
016-749
016-764
016-766
016-767
016-791
016-795
016-797
016-920
016-921
016-930
016-931
016-981
What You Can Do
Replace the specified toner cartridge.
See also:
• "Replacing Toner Cartridges" on page 247
Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.
See also:
• "Online Services" on page 263
Press the button to clear the message. Check if the SMTP server setting is correct by
contacting your server administrator.
Press the button to clear the message. Check if the user name and password for the POP3
server are set correctly by contacting your server administrator.
Press the button to clear the message. Check if the SMTP server address and e-mail
destination are set correctly.
Press the button to clear the message. Check if the user name and password used for the
SMTP server are set correctly by contacting your server administrator.
Press the button to clear the message. Retry when the printer does not process any job.
Press the button to cancel the current job. Retry when the printer does not process any job.
Press the button to clear the message. If this does not solve the problem, contact the Fuji Xerox
local representative office or an authorized dealer.
See also:
• "Online Services" on page 263
Press the button to cancel the current job. Retry when the printer does not process any job.
Press the button to clear the message. Check if the network is properly connected. If this does
not solve the problem, contact SMTP server administrator.
Press the button to clear the message. Ping the IP address of the SMTP server and check if the
server is available. If this does not solve the problem, contact SMTP server administrator.
Press the button to clear the message. Check if the recipient address is correct, and try
scanning again.
Insert the USB storage device and press the
Press the button to clear the message. Check if the file format is correct.
Press the button to clear the message. Check if the USB storage device is securely connected.
Press the button to clear the message. Check the wireless setting for the access point and the
printer, and try wireless settings again.
Remove the device from the USB drive and press the
Press the button to cancel the current job. Try copying fewer documents.
button to clear the message.
button to clear the message.
Troubleshooting 233