Removing The System Memory (Ram) - 2 - EUROCOM P570WM Service Manual

Disassembly

Removing the System Memory (RAM) - 2

Figure 9
RAM-2 Module
Memory Upgrade Process
Removal
1. Turn off the computer, and turn it over and remove the battery
2. Remove screws
a. Remove screws and
3. Carefully disconnect CPU fan cables
component bay cover.
the label (i.e. remove screw
b. Disconnect the cables
and remove the screws.
sink.
c Remove the heatsink.
4. Carefully (it may be hot) lift up the heatsink

6. Component Bay
Cover
15. Heatsink
• 11 Screws
2 - 14 Removing the System Memory (RAM) - 2
- and component bay cover
1 5
7
first, and lastly remove screw
9
a.
1 2 3
4
b.
11
14
7
8
(page 2 - 5) and remove the keyboard
.
6
& , and remove screws
-
8 9 14
) and carefully pull the tab to disconnect the heat
14
off the computer.
15
6
5
12
13
10
9
(page 2 -
in the reverse order to that indicated on
c.
15
5).