EUROCOM P570WM Service Manual page 35

6. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable.
7. Disconnect the keyboard ribbon cable
its locking collar socket .
14
8. Remove the keyboard , and screws
15
e.
11
15
13
12
9. Reverse the process to replace the keyboard (make sure to reconnect the keyboard cable).
10. Snap the LED cover module down
11. Push the LED cover module down on the left side at point
and snap down to secure it in place.
12. Replace the screws on the bottom of the computer.
g.
20
19
from the locking collar socket
11
- from the keyboard shielding plate.
16 18
f.
17
14
16
12
13
15 11
Keyboard Tabs
at the top fo the module at point
19
, and then slide the module to the right (as illustrated)
22
h.
21
, and the keyboard LED cable
12

18
Re-Inserting the Keyboard
When re-inserting the keyboard
firstly align the five keyboard
tabs at the bottom (Figure
the bottom of the keyboard with
the slots in the case.
& .
20 21
22
Disassembly
from
13
Figure 7
Keyboard Removal
(cont'd.)
e. Disconnect the cable
from the locking collar.
f. Remove the keyboard.
g. Snap down the LED cov-
er.
7f) at
h. Push the LED cover on
the left side at point
and the slide toward the
right to secure it in place.

15. Keyboard
19. LED cover module
• 3 Screws
Removing the Keyboard 2 - 11
22