EUROCOM P570WM Service Manual page 32

Disassembly
4. Remove screws
Figure 4
5. Carefully lift the hard disk assembly using two hands at points
HDD Assembly
6. Lift the hard disk assembly
Removal (cont'd.)
7. Separate the hard disk board connector
8. Remove screws
9. Separate the hard disk(s)
c. Remove the screws.
d. Lift the hard disk assem-
10. Reverse the process to install a new hard disk(s) and make sure to connect cable
bly using two hands at
-
4
points 9 - 10 .
c.
e. Lift the hard disk assem-
bly up out off the compu-
ter.
f. Remove the HDD(s) from
the connector
g. Remove the screws and
separate the HDD(s)
from case.
d.

11 Hard Disk Assembly
12 Hard Disk Board
Connector
25. Hard Disks
26. Hard Disk Mylar
27. Hard Disk Case
• 16 Screws
2 - 8 Removing the Hard Disk Drive
-
and pull the tab to disconnect the connector
4 7
out of the computer.
11
- (depending on how many hard disks you have installed in the assembly).
13 24
and hard disk mylar
25
(Figure c).
7
e.
8
4 5
6
7
10
9
f.
from hard disk assembly.
8
- .
9 10
from the hard disk assembly.
12
from the case
26 27
g.
21
11
22
11
12
.
before screwing in screws
8
13
16
14
26
15
25
17
18
27
23
24
25
19
20