NCR 7454 Hardware User's Manual page 84

2-34 Chapter 2: Hardware Installation
11. Create a new string value to contain the password for the default
user. Select the
12. Name the new entry
13. Edit the string value. With DefaultPassword selected, select the
menu and then select
default user (from Step 1). The example below uses password.
14. Select to set the value.
OK
This completes the client installation.
To bypass auto logon, and to log on as a different user, hold down the
SHIFT key after a logoff or after a Windows NT restart.
menu, select
Edit New
DefaultPassword
. Enter the value of the password of the
Modify
and then select
String Value
.
.
Edit